Run the lab before you can afford the lab.
Mbari Labs lets students and technical professionals practise hardware engineering, wet-lab life sciences, and courtroom law in simulation. An AI tutor checks the work and explains each mistake—in a browser, on an Android phone, and offline.
The Campus Laboratory Bottleneck
Why physical engineering and science faculties struggle to scale—and how deterministic simulation fixes it.
⚠ Physical Scarcity
For Hardware Engineers, Students & Builders
Wire an Arduino Uno R3 and breadboard with real-time circuit physics, cycle-accurate AVR8 firmware execution, and destructive fault simulation.
Synchronized Breadboard CAD & 4-Channel Oscilloscope
Compile real `.ino` C++ sketches directly in your browser. Inspect PWM signals, analog ADC voltages, and netlist continuity with instant feedback.
For Biochemistry & Life Science Students
Practise analytical acid-base titrations and 1000× optical microscopy before entering a hazardous physical wet-lab.
Volumetric Endpoint Accuracy
Add NaOH drop by drop. Overshooting the stoichiometric equivalence point ruins the sample (₦3,800 saved in sim).
Ideal endpoint (99.4% accuracy). Pale pink persists >30s without overshooting.
Spore-forming soil & gut model organism. Observe chain formation under 1000× oil immersion.
For Law Students & Moot Advocates
Cross-examine witnesses, spot evidentiary defects in real time, and get marked against the Nigerian Evidence Act 2011.
Nigerian Courtroom Procedure & Section 84 Evidentiary Rulings
When opposing counsel tenders uncertified electronic logs, students must rise within 5 seconds, articulate the statutory ground, and cite Section 84(2) to protect the trial record.
“”
“My Lord, we object to the admissibil...”
“Objection sustained. Counsel for the...”
An AI Tutor That Speaks Your Language
Oka-Uzu inspects your live netlist or titration and asks Socratic questions to guide you to the fix. English is live; Pidgin, Igbo, Yorùbá, and Hausa are reviewed by native-speaking engineers before release.
“Why did my red LED burn out when I connected pin D9 straight to the anode?”
“Pin D9 outputs 5.0V, while a red LED drops only ~2.0V and is rated for 30 mA max. Without a series resistor to drop the remaining 3.0V, current spikes to 120 mA. Using Ohm's Law (R = 3.0V / 0.015A), what resistor value should you place in series?”
For Universities & Technical Faculties
Instructors write test assertions once. Every student circuit, titration, and sketch is run against them automatically with zero marking bias.
Cohort: 250 Students / Year
Join the next lab cohort.
The Hardware Workbench prototype is live right now. Life Sciences and Legal Moot labs open to the waitlist first. University faculties can request departmental pilot access.